Camera / Vision AI
Receive PPE, restricted-zone, person-vehicle proximity and other external risk candidates.
Four simple steps
1. RECEIVE
External risk signal
External risk signal
2. REVIEW
Authorized human check
Authorized human check
3. ACT
Owner, due date, corrective action
Owner, due date, corrective action
4. VERIFY
Evidence and residual-risk check
Evidence and residual-risk check
Operating boundary: external systems and AI cannot autonomously make legal conclusions, issue stop-work orders, declare evidence verified or close an event. Human authority remains required.
Connect without replacing what already works
Plant sensors / access
Connect sensor, access, gate and vehicle signals to the same review workflow.
AMR / AGV / forklift
Review position, speed, proximity, collision risk and stop events as candidates.
SCADA / MES / WMS / BMS
Review control alarms and work information under a customer-specific interface contract.
Common equipment-signal integration questions
Can an equipment alarm become a safety action?
Yes. An agreed event definition plus tenant, site and source scope allows an alarm to enter as a Safety Event candidate. Human review is required before accountable action.
Do you support OPC UA, Modbus/TCP and MQTT?
The normalized ingress contract is implemented for edge inputs identified with these protocols. Live device and gateway compatibility requires site testing of the network and tag model.
How are proprietary signals connected?
An approved, versioned Edge Mapping Profile converts source fields into the common event contract. Unapproved or hash-mismatched mappings fail closed.
Does the same event reach executive and audit output?
The event ID retains human review, owner, deadline, action, evidence, residual risk and approval history for scoped KPIs and an event Evidence Pack.
Ready to review an integration?
Customer-specific tenant, site and source scopes plus controlled credentials are required for operational connections.
Open Integration HubSafety AX PlatformDiscuss integrationTechnical integration details
External signals are normalized as candidates, then promoted to official Safety Events only after authorized human review. COREON links the accepted event to ownership, due date, corrective action, evidence, residual-risk reassessment and final approval.
Integration candidates: PLC and control-panel faults, motor and pump condition, AMR/AGV and forklift state, CCTV analysis, gas and fire detection, access control and SCADA/MES/WMS/BMS alarms. Production scope depends on approved credentials, an agreed event contract and on-site interface validation; vendor or protocol compatibility is not pre-certified.
Review Safety AX architecture · Review Enterprise Command · View use cases